MGAM50 Series Absolute Single-Turn Rotary Autonics Encoders

MGAM50 Series

autonics MGA50 Series encoder

SHORT DESCRIPTION MGAM50 Series

  • High accuracy in harsh environments including shock, vibration, dust, and humidity(compared to optical encoders)
  • Longer service life compared to optical encoders
  • Output code: binary
  • Output interface options: Parallel, SSI (Synchronous Serial Interface)
  • 23-bit (8,388,608) total resolution- 10-bit single-turn (1024 divisions) – 13-bit multi-turn (8192 revolutions)
  • Power supply: 12 – 24 VDCᜡ ± 5%
  • STATUS AVAILABLE IN STOCK

 certmark      certmark     certmark    certmark

STATUS AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE

Autonics MGAM50 Series Technical Specification

Model

MGAM50S8-1013-B-F-PN-24

MGAM50S8-1013-B-F-S-24

Resolution

• Single-turn: 1024 division   • Multi-turn: 8192 revolution

Rotation limit when power OFF 01)

± 90°

Hysterisis

± 0.1°

Positioning error 02)

± 1 bit (LSB: Least Significant Bit)

Output code

Binary 2 code

24 bit, Binary 2 code

Output signal

Single-turn data, Multi-turn count, Overflow alarm (OVF) 03)

Control output

Parallel NPN open collector output

SSI (Synchronous Serial Interface) Line driver output

Inflow current

≤ 20 mA

≤ 20 mA

Residual voltage

≤ 1 VDCᜡ

≤ 0.5 VDCᜡ

Outflow current

≤ -20 mA

Output voltage

≥ 2.5 VDCᜡ

Output logic

Negative logic output

Response speed 04)

≤ 1 ㎲

Multi-turn count reset

Input level: 0 – 1 VDCᜡ

Input logic: Low Active, Open for common use

 

Input level: 5 VDCᜡ ± 5%

Input frequency: 100 kHz to 1 MHz

Max. response freq.

30 kHz

Max. allowable revolution 05)

3,000 rpm

Starting torque

≤ 0.0069 N m

Inertia moment

≤ 80 g·cm2 (8 × 10-6 kg·m2)

Allowable shaft load

Radial: 10 kgf, Thrust: 2.5 kgf

Unit weight (packaged)

≈ 393 g (≈ 523 g)

≈ 261 g (≈ 391 g)

Approval

Power supply

12 – 24 VDCᜡ ± 5% (ripple P-P: ≤ 5%)

Current consumption

Parallel NPN open collector output ≤ 100 mA (no load) SSI Line driver output ≤ 150 mA (no load)

Insulation resistance

Between all terminals and case: ≥ 100 MΩ (500 VDCᜡ megger)

Dielectric strength

Between all terminals and case: 750 VACᜠ 50 / 60 Hz for 1 minute

Vibration

1 mm double amplitude at frequency 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 2 hours

Shock

≲ 50 G

Ambient temp.

-10 to 70 ℃, storage: -25 to 85 ℃ (no freezing or condensation)

Ambient humi.

35 to 85%RH, storage: 35 to 90%RH (no freezing or condensation)

Protection rating

IP50 (IEC standard)

Connection

Axial cable type (cable gland)

Cable spec.

Ø 6 mm, 2 m, shield cable

Parallel NPN open collector output: 17-wire × 2, SSI Line driver output: 10-wire

Wire spec.

AWG28 (0.08 mm), insulator diameter: Ø 0.8 mm

Parallel NPN open collector output: 17-core, SSI Line driver output: 19-core

GET LATEST PRICE