EWLS50 Series Absolute Single-Turn Rotary Autonics Encoders
SHORT DESCRIPTION EWLS50 Series
- Resolution: 0.1 mm
- Maximum measurement range: 512 mm
- Various output code options: Binary, Gray code
- STATUS AVAILABLE IN STOCK
STATUS AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE
Autonics EWLS50 Series Technical Specifications
Model | EWLS50-512-B-PN-24 | EWLS50-512-G-PN-24 |
Measuring range | 512 mm |
|
Max. output pulse | 5,120 division / 512 mm |
|
Min. resolution | 0.1 mm |
|
Accuracy | ± 0.1 / 100 mm |
|
Response speed | ≤ 500 mm / sec |
|
Wire movement limit when power is OFF 01) | ≤ ± 20 mm |
|
Output code | Binary | Gray |
Output signal | Data, Overflow alarm (OVF) |
|
Control output | Parallel NPN open collector output |
|
Inflow current | ≤ 32 mA |
|
Residual voltage | ≤ 1 VDCᜡ |
|
Output logic | Negative logic output |
|
Response speed 02) | ≤ 1 ㎲ |
|
Input signal | Reset signal input (Reset) |
|
Input level | H: 5 – 24 VDCᜡ, L: 0 – 1.2 VDCᜡ |
|
Input logic | Low Active, OPEN or HIGH for common use |
|
Input time | ≥ 100 ms |
|
Max. response freq. | 50 kHz |
|
Wire tensile force | 0.5 to 4 N (50 to 400 g·f) |
|
Unit weight | ≈ 450 g |
|
Approval | ᜢ ᜫ |
|
Power supply | 12 – 24 VDCᜡ ± 5% (ripple P-P: ≤ 5%) |
Current consumption | ≤ 150 mA (no load) |
Insulation resistance | ≥ 100 MΩ (500 VDCᜡ megger) |
Dielectric strength | 750 VACᜠ 50 / 60 Hz for 1 minute |
Vibration | 1 mm double amplitude at frequency 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 2 hours |
Shock | ≲ 50 G |
Ambient temp. | -10 to 70 ℃, storage: -25 to 85 ℃ (no freezing or condensation) |
Ambient humi. | 35 to 85%RH, storage: 35 to 90%RH (no freezing or condensation) |
Connection | Axial cable type (cable gland) |
Cable spec. | Ø 6 mm, 17-wire, 2 m, shield cable |
Wire spec. | AWG28 (0.08 mm, 19-core), insulator diameter: Ø 0.8 mm |
Material | Cap: SPCD, Body: A2024, Wire: SUS303 |