EP58 Series Absolute Single-Turn Rotary Autonics Encoders
SHORT DESCRIPTION Ep58 Encoder
- Ø 58 mm flange single-turn absolute rotary encoders Shaft, blind hollow shaft models available
- Various output codes available: BCD, binary, Gray code
- Various resolutions: up to 10-bit (1024 divisions)
- Power supply: 5 VDCᜡ ± 5%, 12 – 24 VDCᜡ ± 5%
- STATUS AVAILABLE IN STOCK
STATUS AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE
Autonics Ep58 Series Technical Specifications
Model | EP58□-□-□□-N-□ | EP58□-□-□□-P-□ |
Resolution 01) | ≤ 1024 division |
|
Output code | BCD / Binary / Gray code model |
|
Control output | NPN open collector output | PNP open collector output |
Inflow current | ≤ 32 mA | – |
Residual voltage | ≤ 1 VDCᜡ | – |
Outflow current | – | ≤ 32 mA |
Output voltage | – | ≥ (power supply – 1.5) VDCᜡ |
Response speed 02) | TON ≤ 800 nsec, TOFF ≤ 800 nsec |
|
Max. response freq. | 35 kHz |
|
Max. allowable revolution 03) | 3,000 rpm |
|
Approval | ᜢ ᜫ |
|
Power supply | 5 VDCᜡ ± 5% (ripple P-P: ≤ 5%) / 12 – 24 VDCᜡ ± 5% (ripple P-P: ≤ 5%) model |
Current consumption | ≤ 100 mA (no load) |
Insulation resistance | Between all terminals and case: ≥ 100 MΩ (500 VDCᜡ megger) |
Dielectric strength | Between all terminals and case: 750 VACᜠ 50 / 60 Hz for 1 minute |
Vibration | 1 mm double amplitude at frequency 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 2 hours |
Shock | ≲ 50 G |
Ambient temp. | -10 to 70 ℃, storage: -25 to 85 ℃ (no freezing or condensation) |
Ambient humi. | 35 to 85%RH, storage: 35 to 90%RH (no freezing or condensation) |
Protection rating | IP50 (IEC standard) |
Connection | Axial cable type (cable gland) |
Cable spec. | Ø 7 mm, 15-wire, 2 m, shield cable |
