ENC Series Autonics Incremental Rotary Encoder Wheel Type

ENC Series

Wheel type encoders ideal for measuring length or speed of continuously moving objects
Output waveform of measured distance is proportional to International Weights and Measures (meters / inches)
Power supply: 5 VDCᜡ ± 5%, 12 – 24 VDCᜡ ± 5%

Model	ENC-1-□-T-□-□	ENC-1-□-N-□-□	ENC-1-□-V-□-□
Min. measuring unit [/pulse]	1 mm / 1 cm / 1 m / 0.01 yd / 0.1 yd / 1 yd model
Control output	Totem pole output	NPN open collector output	Voltage output
Output phase	A, B	A, B	A, B
Inflow current	≤ 30 mA	≤ 30 mA	–
Residual voltage	≤ 0.4 VDCᜡ	≤ 0.4 VDCᜡ	≤ 0.4 VDCᜡ
Outflow current	≤ 10 mA	–	≤ 10 mA
Output voltage (5 VDCᜡ)	≥ (power supply -2.0) VDCᜡ	–	–
Output voltage (12 – 24 VDCᜡ)	≥ (power supply -3.0) VDCᜡ	–	–
Response speed ⁰¹⁾	≤ 1 ㎲
Max. response freq.	180 kHz
Max. allowable revolution ⁰²⁾	5,000 rpm
Starting torque	Dependent on the coefficient of friction
Unit weight	≈ 494 g
Approval	ᜢ ᜫ	ᜢ ᜫ	ᜢ ᜫ

Power supply	5 VDCᜡ ± 5% (ripple P-P: ≤ 5%) / 12 – 24 VDCᜡ ± 5% (ripple P-P: ≤ 5%) model
Current consumption	≤ 80 mA (no load)
Insulation resistance	Between all terminals and case: ≥ 100 MΩ (500 VDCᜡ megger)
Dielectric strength	Between all terminals and case: 750 VACᜠ 50 / 60 Hz for 1 minute
Vibration	1 mm double amplitude at frequency 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 2 hours
Shock	≲ 75 G
Ambient temp.	-10 to 70 ℃, storage: -25 to 85 ℃ (no freezing or condensation)
Ambient humi.	35 to 85%RH, storage: 35 to 90%RH (no freezing or condensation)
Protection rating	IP50 (IEC standard)
Connection	Axial cable type / Cable connector type model
Cable spec.	Ø 5 mm, 4-wire, shield cable cable type: 2 m, cable connector type: 250 mm
Wire spec.	AWG24 (0.08 mm, 40-core), insulator diameter: Ø 1 mm
Connector spec.	M17 6-pin socket type