E58-A Series Autonics Sine Wave Incremental Rotary Encoder
SHORT DESCRIPTION E58-A Encoder
- Tapered shaft
- Analog sine wave operational amplifier(OP Amp.) output
- Power supply:5 VDCᜡ ± 5%
- STATUS AVAILABLE IN STOCK
STATUS AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE
Autonics E58-A Series Technical Specifications
|
Model |
E58S9.25-2048-10-A-5-□ |
|
Resolution |
2,048 PPR |
|
Control output |
Analog sine wave OP Amp. output |
|
Output phase |
A, A, B, B, Z, Z, C, C, D, D |
|
Output current |
≤ 10 mA |
|
Output voltage VP-P |
0.5 ± 0.1 VDCᜡ |
|
DC OFFSET Vref |
2.5 ± 0.3 VDCᜡ |
|
Max. response frequency |
200 kHz |
|
Max. allowable revolution |
6,000 rpm |
|
Shaft |
Taper shaft Ø 9.25 mm, Taper 1 : 10 |
|
Starting torque |
≤ 0.0098 N m |
|
Inertia moment |
≤ 15 g·cm2 (1.5 × 10-6 kg·m2) |
|
Allowable shaft load |
Radial: ≤ 10 kgf, Thrust: ≤ 2.5 kgf |
|
Unit weight (packaged) |
≈ 930 g (≈ 1.02 kg) |
|
Approval |
ᜢ ᜫ |
|
Power supply |
5 VDCᜡ ± 5% (ripple P-P: ≤ 5%) |
|
Current consumption |
≤ 120 mA (no load) |
|
Insulation resistance |
Between all terminals and case: ≥ 100 MΩ (500 VDCᜡ megger) |
|
Dielectric strength |
Between all terminals and case: 750 VACᜠ 50 / 60 Hz for 1 minute |
|
Vibration |
1 mm double amplitude at frequency 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 2 hours |
|
Shock |
≲ 100 G |
|
Ambient temp. |
-20 to 100 ℃, storage: -25 to 100 ℃ (no freezing or condensation) |
|
Ambient humi. |
35 to 85%RH, storage: 35 to 90%RH (no freezing or condensation) |
|
Protection rating |
IP50 (IEC standard) |
|
Connection |
Axial / Radial cable type model |
|
Cable spec. |
Ø 6 mm, 17-wire, 9 m, shield cable |
|
Wire spec. |
AWG28 (0.08 mm, 17-core), insulator diameter: Ø 0.8 mm |
